RFID card reader with waterproof numeric keypad.
The TW-5X is a "stand-alone" access control by code/card that uses the latest micro-processing technology to operate on electrical locks/latlocks and safety systems that require momentary contact or dry contact.
- Waterproof according to IP66.
- Protected by a strong vandal-proof metal case;
- Operating codes and parameters are stored in the microprocessor and are not lost in the event of a power failure.
- This access control remembers up to 600 card and 4-6 digit code users.
- Timed recurrent: 1-99 seconds;
- Fully programmable through keyboard(including key sounds and Light).
- Opening with card, code, or card + code;
- Card Type: EM 125KHz | Mifare: 13.56MHz
- Power 12-24 V DC/AC;
- 12 backlit keys;
- Dimensions: 148 x 56 x 22.5 (mm);
- Various modes of operation:
- Standalone
- Reader
- In conjunction with another TW-5X with interlock function
- Toggle mode: Displays 1 time the card port opens, Displays again the card port closes.
Sk
Power supply with UPS
- When AC power is available, it is transformed to 12 VDC and supplied to the electric lock
- When AC power fails, it is replaced by the UPS battery
- When the battery charge drops below 10 V, the battery will no longer provide power supply and must be powered again by the AC source.
- The battery is protected against electrical discharge, in order to extend its durability
- With compartment for the battery.
- Led ON/OFF
- Charging Voltage: 13V~13.5V
- Input voltage: 220V
- Output Voltage: 12VDC
- Max. output current: 3 A
- Dimensions: 210x163x50mm
Battery 12V 7Ah
- Voltage: 12V
- Capacity: 7AH
- Main Applications: Alarms, Fire Panels, Emergency Lighting and UPS Systems
- Lifespan (average battery life): 5 years
- Operating Temperature: -20ºC ~ 55ºC
- Dimensions (mm): 151 x 65 x 95
IF
12V 7Ah Battery
- Voltage: 12V
- Capacity: 7AH
- Main applications: Alarms, fire systems, emergency lighting and UPS systems
- Lifetime (average battery life): 5 years
- Operating temperature: -20ºC ~ 55ºC
- Dimensions (mm): 151 x 65 x 95
Ca
Model ABK-805
- To be mounted on the wall
- Casted case with stainless steel button, to be connected to the access control to open the door from the inside
- Nice appearance and easy to use
- Dimensions: 83x32x25(mm)
- Current: 3A@36VDC Max
- Output contacts: NO\COM
- Tested for: 500000 cycles
- Working temperature: ~ (-10 to +55)°C or (14 to 131)ºF
- Working humidity: 0-95%
- Weight: 0.3kg
Nr
TW-RA3 - 3m cable
Cable for connection and power of elements of the Triple W Kit's
- Cable for electrical connections.
- Length: 3m.
TW-0180 - Wiring set for KIT's
Cables for connection and power of elements of the Triple W Kit's
- Set composed of:
- 3 X Cables for electrical connections with 3 meters in length each
- 3 X electrical connections
- 9 X smugglers
RFID tag in key chain format (drop)
- Frequency: 125KHZ
- For exclusive use with our access controllers
- Operation by proximity. (5 cm)
- No battery required
- Size: 36.8x30.4x7.2
- The same key can open different drivers.
Pre-wiring includes:
Connectors for easy installation;
Electrical cables connectors with 3m;
Electrical assembly of components.
NO Fail-Safe electric latch (S/ power, open door)
- Fail-Safe (No power, open door)
- Latch with fit
- Measurements (mirrorless latch): 67 (C) x 20.5 (L) x 28.5 (A) mm
- Voltage: 12 VDC
- Current: 220 mA
- Installation: Wooden or metal doors
- Available in 3 types of mirror
- Price shown is MIRRORLESS, only latch