RFID card reader with waterproof numeric keypad.
The TW-5X is a "stand-alone" access control by code/card that uses the latest micro-processing technology to operate on electrical locks/latlocks and safety systems that require momentary contact or dry contact.
- Waterproof according to IP66.
- Protected by a strong vandal-proof metal case;
- Operating codes and parameters are stored in the microprocessor and are not lost in the event of a power failure.
- This access control remembers up to 600 card and 4-6 digit code users.
- Timed recurrent: 1-99 seconds;
- Fully programmable through keyboard(including key sounds and Light).
- Opening with card, code, or card + code;
- Card Type: EM 125KHz | Mifare: 13.56MHz
- Power 12-24 V DC/AC;
- 12 backlit keys;
- Dimensions: 148 x 56 x 22.5 (mm);
- Various modes of operation:
- In conjunction with another TW-5X with interlock function
- Toggle mode: Displays 1 time the card port opens, Displays again the card port closes.
12VDC power supply
- Input voltage: 110-240V AC
- Output voltage: 12VDC - Max. 1.5 A
- Power: 18W
- Weight: 0.12Kg
- Dimensions: 48 x 49.50 x 26 mm
- Short-circuit protection
- IP67 protection
- Operating Temperature: 0ºC to +45ºC
- Compact, can be mounted directly on the surface or in a inlay/junction box
WATERPROOF electric latch
- IP66 WATERPROOF LATCH,
- Fail-Secure (No power, closed door)
- Resistance force up to 5000 N
- Maximum PreLoad: 10N
- Measurements (mirrorless latch): 65 (C) x 15 (L) x 26 (A) mm
- Voltage: 9-24 VDC
- Operating temperature: -15ºC to +40ºC
- Installation: Wooden or metal doors
- Price shown is MIRRORLESS, only latch
- Medidas do espelho:
- To be mounted on the wall
- Casted case with stainless steel button, to be connected to the access control to open the door from the inside
- Nice appearance and easy to use
- Dimensions: 83x32x25(mm)
- Current: 3A@36VDC Max
- Output contacts: NO\COM
- Tested for: 500000 cycles
- Working temperature: ~ (-10 to +55)°C or (14 to 131)ºF
- Working humidity: 0-95%
- Weight: 0.3kg
TW-RA3 - 3m cable
Cable for connection and power of elements of the Triple W Kit's
- Cable for electrical connections.
- Length: 3m.
TW-0180 - Wiring set for KIT's
Cables for connection and power of elements of the Triple W Kit's
- Set composed of:
- 3 X Cables for electrical connections with 3 meters in length each
- 3 X electrical connections
- 9 X smugglers
RFID tag in key chain format (drop)
- Frequency: 125KHZ
- For exclusive use with our access controllers
- Operation by proximity. (5 cm)
- No battery required
- Size: 36.8x30.4x7.2
- The same key can open different drivers.
Connectors for easy installation;
Electrical cables connectors with 3m;
Electrical assembly of components.